光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

Freeze–Thaw-Promoted Fabrication of Clean and Hierarchically Structured Noble-Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble-metal aerogels (NMAs) have drawn increasing attention because of their self-supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self-healing properties of noble-metal aggregates, the freezing-promoted salting-out behavior, and the ice-templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble-metal gels within one day without extra additives. In light of their cleanliness, the multi-scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble-metal catalysts.     

A Closed‐Loop Control Strategy for Producing Nitrile Rubber of Uniform Chemical Composition in a Semibatch Reactor: A Simulation Study

To improve the quality of industrial nitrile rubbers, the copolymer chemical composition, p_A(t), should ideally be kept constant along the reaction. This work proposes a closed‐loop control strategy for the semibatch operation of the reactor with the aim of regulating p_A(t) within a reduced range of variability. The proposed strategy is evaluated by simulating a mathematical model of the process. To this effect, a simplified mathematical model of the reaction is first derived and then utilized to obtain a suboptimal control law and a soft‐sensor that estimates the polymerization rates. The suboptimal control law is compensated by adding a term proportional to errors in p_A(t). The simulated example considers the production of the low‐composition AJLT grade, with the copolymerization reaction represented by a detailed mathematical model adjusted to an industrial plant. Due to the high performance of the soft‐sensor, the simulation results suggest that the proposed closed‐loop strategy is efficient to adequately regulate p_A(t) in spite of structural and parametric uncertainties, while other quality variables remained practically unaffected.     

A bound on the Wasserstein-2 distance between linear combinations of independent random variables

We provide a bound on a distance between finitely supported elements and general elements of the unit sphere of ${?}^2\left({\mathbb{N}}^1\right)$. We use this bound to estimate the Wasserstein-2 distance between random variables represented by linear combinations of independent random variables. Our results are expressed in terms of a discrepancy measure related to Nourdin–Peccati’s Malliavin–Stein method. The main application is towards the computation of quantitative rates of convergence to elements of the second Wiener chaos. In particular, we explicit these rates for non-central asymptotic of sequences of quadratic forms and the behavior of the generalized Rosenblatt process at extreme critical exponent.     

Poisson discretizations of Wiener functionals and Malliavin operators with Wasserstein estimates

This article proposes a global, chaos-based procedure for the discretization of functionals of Brownian motion into functionals of a Poisson process with intensity $\lambda >0$. Under this discretization we study the weak convergence, as the intensity of the underlying Poisson process goes to infinity, of Poisson functionals and their corresponding Malliavin-type derivatives to their Wiener counterparts. In addition, we derive a convergence rate of $O\left({\lambda }^{?1∕4}\right)$ for the Poisson discretization of Wiener functionals by combining the multivariate Chen–Stein method with the Malliavin calculus. Our proposed sufficient condition for establishing the mentioned convergence rate involves the kernel functions in the Wiener chaos, yet we provide examples, especially the discretization of some common path dependent Wiener functionals, to which our results apply without committing the explicit computations of such kernels. To the best our knowledge, these are the first results in the literature on the universal convergence rate of a global discretization of general Wiener functionals.     

Analyzing the coexistence of DSRC and Wi-Fi networks using the Poisson line Cox process

Vehicular networks can aid in traffic monitoring, autonomous driving, and car accidents prevention. Yet, the deployment of these networks has been delayed due to the limited spectrum, especially for the case of unlicensed operations. To handle this issue, the Federal Communications Commission (FCC) proposed to permit Wi-Fi devices to operate in the 5.9 GHz band allocated to the intelligent transportation system (ITS). In a recent work, we analyzed the impact of the coexistence of dedicated short range communications (DSRC) and Wi-Fi on future DSRC network deployments by developing a stochastic geometry analytical model that considers a dynamic medium access probability (MAP) of DSRC nodes which uses carrier sense multiple access with collision avoidance (CSMA/CA). This previous work was based on the standard 2D homogeneous Poisson Point Process (PPP) model. In this work, we model the roads using the more applicable but more complex Poisson line process (PLP) Cox point process. We generate performance metrics represented through coverage probability and area system throughput, and we compare these results to our earlier work. The importance of this work is two-fold. First, it allows a further understanding of the impact of DSRC-Wi-Fi coexistence on future DSRC network deployments, and second, it highlights the effectiveness of the PLP in modeling the distribution of vehicles in an area by producing more accurate performance results.     

Effective permittivity of liquid crystal nanodispersions and composites with different pore structure

The volume filling fraction dependence of the effective permittivity of the nematic liquid crystal 4-n-pentyl-4’-cyanobiphenyl embedded in different porous membranes and dispersed with aerosil nanoparticles was determined using broadband dielectric spectroscopy in the frequency range from 10⁶ to 10⁹ Hz. The experimental data were analyzed and compared with some existing theories based on the effective medium approximation and their modifications. The obtained effective permittivities as a function of the volume filling fraction lie between the lower limits of the Wiener and Hashin–Shtrikman bounds. The observed shift of the experimental points reflects the changes in the structure of the investigated composites.